Minnesota Administrative Rules

7019.3060 VOLATILE ORGANIC COMPOUND (VOC) MATERIAL BALANCE.

If the methods in part 7019.3040 or 7019.3050 are unavailable to an emission reporting facility or a facility issued an option B registration permit under part 7007.1120 that chooses to be assessed a fee under part 7002.0025, subpart 1, item C, subitem (1), the facility may calculate VOC emissions using the material balance method described in this part. This method may be used in conjunction with or instead of emission factors and enforceable limitations methods described in parts 7019.3080 and 7019.3090, where applicable. A person using material balance to calculate VOC emissions shall determine the total VOC emissions (E) as follows:

E = (A - B - C) * (1 - CE)

where:

A = the amount of VOC entering the process. The amount of VOC used in this calculation shall be the amount certified by the supplier or the maximum amount stated on the material safety data sheet or the amount determined by reference method 24.

B = the amount of VOC incorporated into the product. This includes VOCs chemically transformed in production. An explanation of this calculation must also be submitted.

C = the amount of VOC, if any, leaving the process as waste, or otherwise not incorporated into the product and not emitted to the air. If the actual VOC content of the waste is unknown, then C = 0.

CE = the overall efficiency, or the product of capture efficiency and control efficiency, of any device used to capture and/or control VOC emissions, expressed as a decimal fraction of 1.00. The overall efficiency shall be based on efficiency factors, as defined in part 7005.0100, subpart 9b, or shall be based on the overall efficiency verified by a performance test conducted according to parts 7017.2001 to 7017.2060 and 7019.3050. The overall efficiency of a pollution control system that uses a hood, as defined in part 7011.0060, subpart 2, as the emission capture device shall be based on a capture efficiency of 60 percent. If an alternative capture efficiency has been determined by a performance test conducted according to parts 7017.2001 to 7017.2060 and 7019.3050, that capture efficiency shall be used in the calculation of actual emissions.

Statutory Authority:

MS s 116.07

History:

21 SR 165

Published Electronically:

November 29, 2007