If an emission reporting facility or a facility issued an option B registration permit under part 7007.1120 that chooses to be assessed a fee under part 7002.0025, subpart 1, item C, subitem (1), has collected emissions data through use of a CEM in compliance with the preconditions in subitems (1) and (2), the facility shall report that data to the agency in its emission inventory. The emission inventory submitted shall be based on all of the CEM data. The requirements in subitems (1) and (2) must be met:
Facilities required to use this method shall include the following information in their emission inventory:
the total operating time of the applicable emission unit and the total operating time of the CEM;
an explanation of how the emissions were calculated based on the CEM data. Except for facilities subject to part 7017.1020, for periods when the CEM is down and the emissions unit is operating, missing emissions data shall be substituted with CEM data recorded during a representative period of operation of the emissions unit, and, if applicable, of the control equipment operation during the same calendar year for which the inventory is being submitted. The CEM must have recorded data for at least 90 percent of the hours the emission unit was operated for the calendar year for which the inventory is being submitted. If substitute CEM data meeting these conditions is not available, emissions during periods of CEM downtime shall be calculated using the next highest available method on the hierarchy of methods listed in part 7019.3030; and
MS s 116.07
21 SR 165; 23 SR 1764
November 29, 2007
Official Publication of the State of Minnesota
Revisor of Statutes