Unless a part 70, state, or general permit specifies a different control efficiency, the owner or operator of a stationary source must at all times attain at least the control efficiency listed in Table A for each piece of listed control equipment at the stationary source. The applicable control efficiency for a type of listed control equipment and a given pollutant is determined by whether air emissions are discharged to the control equipment through a hood that is certified as described in part 7011.0072, through a noncertified hood, or through a total enclosure. The control equipment efficiencies in Table A do not apply to any hazardous air pollutant.
The owner or operator may not use a control efficiency listed in Table A if:
the commissioner determines that the listed efficiency is inapplicable or is not representative of the source due to complexity of the process or source of emissions, lack of reliable data, presence of a pollutant or constituent such as condensible particulate matter or an organic compound significantly more difficult to control than the overall VOC gas stream that makes the categorical efficiency nonrepresentative, or other site-specific conditions; or
the commissioner determines that alternate site-specific requirements are necessary to ensure compliance with applicable requirements or to protect human health or the environment.
CONTROL EQUIPMENT EFFICIENCY - TABLE A | |||||
ID# | CONTROL EQUIPMENT DESCRIPTION | POLLUTANT | CONTROL EFFICIENCY | ||
TOTAL ENCLO- SURE |
HOOD: CERTI- FIED |
HOOD: NOT CERTIFIED |
Table A - Section 1 - Equipment Designed Primarily for Particulate Matter Control
PM CONTROL CATEGORY-CYCLONES means a device where airflow is forced to spin in a vortex through a tube | |||||
007 | Centrifugal Collector (cyclone)-high efficiency means: a cyclonic device with parameters stated in drawing 1 and table 1 | PM PM-10 |
90% 78% |
72% 62% |
54% 46% |
008 | Centrifugal Collector (cyclone)-medium efficiency means: a cyclonic device with parameters stated in drawing 1 and table 1 | PM PM-10 |
80% 60% |
64% 48% |
48% 36% |
009 | Centrifugal Collector (cyclone)-low efficiency means: a cyclonic device with parameters stated in drawing 1 and table 1 | PM PM-10 |
25% 25% |
20% 20% |
15% 15% |
076 | Multiple Cyclone without Fly Ash Reinjection means: a cyclonic device with more than one tube where fly ash is not reinjected | PM PM-10 |
90% 72% |
72% 58% |
54% 43% |
057, 085 |
Wet Cyclone Separator or Cyclonic Scrubbers means: a cyclonic device that sprays water into a cyclone | PM, PM-10 |
84% | 68% | 51% |
010, 011, 012, 128, 146 |
PM CONTROL CATEGORY- ELECTROSTATIC PRECIPITATORS means: a control device in which the incoming particulate matter receives an electrical charge and is then collected on a surface with the opposite electrical charge | ||||
-assumed efficiency for boiler fly ash control | PM-10 | 40% | NA | NA | |
-assumed efficiency for other applications | PM PM-10 |
98% 94% |
78% 75% |
59% 56% |
|
PM CONTROL CATEGORY - OTHER CONTROLS | |||||
016, 017, 018 |
Fabric Filter means: a control device in which the incoming gas stream passes through a porous fabric filter forming a dust cake | PM PM-10 |
99% 93% |
79% 74% |
59% 56% |
052 | Spray Tower means: a control device in which the incoming gas stream passes through a chamber in which it contacts a liquid spray | PM PM-10 |
85% 84% |
68% 68% |
51% 51% |
053 | Venturi Scrubber means: a control device in which the incoming gas stream passes through a venturi into which a low pressure liquid is introduced | PM PM-10 |
94% 84% |
76% 68% |
57% 51% |
055 | Impingement Plate Scrubber means: a control device in which the incoming gas stream passes a liquid spray and is then directed at high velocity into a plate | PM PM-10 |
77% 77% |
62% 62% |
46% 46% |
056, 113 |
Mechanically Aided Separator means: a device that relies on inertia for separating particles from a gas stream | PM PM-10 |
64% 5% |
52% 4% |
39% 3% |
058 | Wall or Panel Filter means: a control device in which the exiting gas stream passes through a panel of coarse fibers. Other Wall Filters means removable panels for cleaning and replacement, or liquid curtains for particulate removal that provide little resistance to air flow | PM PM-10 |
85% 85% |
68% 68% |
51% 51% |
101 | HEPA Filter or ULPA Filter means: a high efficiency wall or panel filter designed for collection of submicron particles | PM PM-10 |
99.98% 99.98% |
80% 80% |
60% 60% |
503 | Charged Scrubber means: a control device in which electric power is used to precharge particulate matter in the gas stream as a means of increasing the scrubber's collection efficiency for fine particles | PM PM-10 |
94% 84% |
76% 68% |
57% 51% |
517 | Condensation Scrubber means: a control device in which steam is injected into a wet scrubber to create supersaturated conditions and promote condensation of water on fine particulate matter in the gas stream | PM PM-10 |
94% 84% |
76% 68% |
57% 51% |
Table A - Section 2 - Equipment Designed for VOC Control (includes efficiencies for pollutants where there is a co-benefit of control)
VOC CONTROL CATEGORY | |||||
019, 020, 109, 116, 509 | Catalytic Afterburners (catalytic oxidation) means: a device used to reduce VOCs to the products of combustion through catalytic (use of a catalyst) oxidation in a combustion chamber | VOC PM PM-10 CO |
94% 62% 62% 94% |
76% 50% 50% 76% |
57% 37% 38% 57% |
021, 022, 131, 133, 510 | Thermal Afterburners (thermal oxidation) means: a device used to reduce VOCs to the products of combustion through thermal (high temperature) oxidation in a combustion chamber | VOC PM PM-10 CO |
97% 62% 62% 97% |
78% 50% 50% 78% |
58% 37% 37% 58% |
023 | Flaring or Direct Combustor means: a device in which air, combustible organic waste gases, and supplementary fuel (if needed) react in the flame zone (e.g., at the flare tip) to destroy the VOCs | VOC PM PM-10 CO |
98% 61% 61% 98% |
79% 50% 50% 79% |
59% 37% 37% 59% |
Drawing 1
Table 1 | |||
Cyclone Type | |||
Ratio Dimensions | High Efficiency | Medium Efficiency | Low Efficiency |
Height of inlet, H/D | ≤0.44 | >0.44 and <0.8 | ≥0.8 |
Width of inlet, W/D | ≤0.2 | >0.2 and <0.375 | ≥0.375 |
Diameter of gas exit, De/D | ≤0.4 | >0.4 and <0.75 | ≥0.75 |
Length of vortex finder, S/D | ≤0.5 | >0.5 and <0.875 | ≥0.875 |
If one or more of the "ratio dimensions," as listed in table 1, are in a different efficiency category (high, medium, low), then the lowest efficiency category shall be applied.
Any owner or operator of a stationary source that used the control efficiencies in part 7011.0070 to qualify for its permit and is ineligible for its permit on or after January 1, 2007, shall apply for another type of permit on or before December 31, 2008.
The owner or operator of a stationary source may use an alternative control equipment efficiency or capture efficiency or both for the control equipment listed in subpart 1, if the actual control efficiency or capture efficiency has been verified by a performance test approved by the commissioner under parts 7017.2001 to 7017.2060. The owner or operator of a stationary source may use a control equipment efficiency for listed control equipment for a hazardous air pollutant, if the control efficiency has been verified by a performance test approved by the commissioner under parts 7017.2001 to 7017.2060. The request for the alternative control efficiency or capture efficiency or both may be made through a permit application for a part 70, state, registration, capped, or general permit, or in a required notice or application submitted under parts 7007.1150 to 7007.1500. The owner or operator of a stationary source must attain at all times the alternative control efficiency or capture efficiency or both for a piece of listed control equipment at the stationary source established under this subpart.
MS s 116.07
19 SR 1345; 20 SR 2316; 22 SR 1237; 23 SR 2224; 29 SR 626; 32 SR 904
October 1, 2014
Official Publication of the State of Minnesota
Revisor of Statutes