If the applicant is requesting the issuance, modification, revocation and reissuance, or reissuance of a major facility substance storage permit, the applicant shall submit the following information to the commissioner:
§
B.
for each outdoor tank system:
§
(3)
design capacity in gallons;
§
(4)
year of tank's installation;
§
(5)
status of tank as active or out of service under part 7151.8200;
§
(6)
tank construction material;
§
(7)
method of tank fabrication (field-erected or shop-fabricated);
§
(8)
tank wall construction;
§
(9)
tank floor construction;
§
(10)
substance level gauging mechanism;
§
(11)
overfill protection system on tank;
§
(12)
corrosion protection system for the underside of each tank floor;
§
(13)
leak detection system;
§
(14)
aboveground and underground piping location, fabrication, and preventative safeguards;
§
(15)
date of the most recent out-of-service inspection and the method used to evaluate the tank;
§
(16)
the scheduled or estimated date of the next out-of-service inspection; and
§
(17)
secondary containment area information including:
§
(a)
containment area number;
§
(b)
tank number of each tank within the containment area;
§
(c)
volume in gallons of the secondary containment area;
§
(d)
construction materials including the dike walls and basin area; and
§
(e)
the permeability factor of the materials used to construct the containment area;
§
D.
site geology information:
§
(1)
average or estimated depth to groundwater;
§
(2)
native soil classification, between surface and groundwater;
§
(3)
the calculated or estimated vertical permeability of native soil, not including any containment liner;
§
(4)
average or estimated depth to bedrock;
§
(5)
bedrock type and formation name; and
§
(6)
existing tank or pipe-related site contamination or any investigation indicating no contamination; and